Invacare XLT Jr, XLTPRO manual Adjusting Seat Height - All Models Except XLT Gold and Top End Force

SECTION 6—RIDING POSITION

Adjusting Seat Height - All Models Except XLT Gold and Top End Force

NOTE: For this procedure, refer to FIGURE 6.8.

1.Loosen, but DO NOT remove the four socket screws securing the rear of the seat to the handcycle frame.

2.Remove the two socket screws securing the front of the seat frame to the handcycle frame.

3.Align the seat height adjustment clamp with the desired height adjustment hole in the seat height adjustment bracket.

4.Install the two socket screws to secure the front of the seat frame to the handcycle frame.

Back Support Tube

Seat Angle

Adjustment

Clamps

Height Adjustment Clamp

Front Socket Screw

Height Adjustment Bracket

	Handcycle	Seat Frame
Rear Socket Screws	Frame

FIGURE 6.8 Adjusting Seat Height - All Models Except XLT Gold and Top End Force

Recumbent Handcycle Series 38 Part No 1114850