Invacare Top End XLT Pro, XLTPRO, XLT Jr manual Using/Replacing Footrest Strap, Using Footrest Strap

SECTION 6—RIDING POSITION

Using/Replacing Footrest Strap

WARNING

Footrest straps MUST be inspected before each use. Exposure to moisture (i.e.- wet weather or puddles) will damage fastening strips. Footrest strap will not hold feet securely in footrest if fastening strips are damaged. DO NOT operate handcycle if footrest straps are wet or damaged, otherwise severe injury may occur.

ALWAYS wear shoes and securely strap feet in using straps provided. Severe injury may occur if feet are not secured while the handcycle is in motion.

Using Footrest Strap Fastening Straps Footrest

NOTE: For this procedure, refer to

FIGURE 6.2.

1. Place feet in footrests.

Footrest

2. Secure feet to footrest strap using smallStrap fastening straps.

FIGURE 6.2 Using Footrest Strap

Replacing Footrest Strap

NOTE: For this procedure, refer to FIGURE 6.3.

1.Pull apart fastening straps securing existing footrest strap to footrest.

NOTE: The small fastening straps should face up.

2.Wrap end of footrest strap over and around the inner footrest tube and firmly connect the hook and loop portions of the footrest strap (Detail ʺAʺ).

3.Wrap end of footrest strap over and around the outer footrest tube and under the inner footrest tube and firmly connect the hook and loop portions of the footrest strap (Details ʺAʺ and “B”).

4.Ensure the footrest strap is firmly attached to the loop fastening strip on the outer footrest tube.

	DETAIL “A”
Footrest Strap	End of Footrest Straps (STEP 4)
Loop Portion			Footrest
(STEP 3)
Small Fastening		Strap Hoo
			Portion
Straps
			(STEP 3)
Inner Footrest
			Outer
Tube
		Footrest
			Tube

DETAIL “B”

End of Footrest Straps (STEP 4 AND 5)

Inner

Footrest

Tube

Outer Footrest	Loop Fastening
Tube	Strip (STEP 6)

FIGURE 6.3 Replacing Footrest Strap

Part No 1114850 33 Recumbent Handcycle Series