Preparation for using the Unit
1. Resetting
Before using the unit, press the “RESET” button on the front of the unit.
The contrast adjustment display will appear. ( See page 9. )
ALWAYS press the “RESET” button on the front of the unit after battery replacement or if the unit fails to operate properly.
NOTE: Pressing the “RESET” button will clear the Easy Learn Memory.
2. Contrast Adjustment
1. | After resetting, the contrast |
| LCD Contrast Adjust |
| adjustment display will appear. |
| |
2. | You can use either | or | LCD Contrast Adjust |
| to adjust the contrast of the display | ||
|
| ||
| Level 1 to Level 16. |
|
|
| (Initial setting = 10) |
|
|
3Press 
to finish.
The display will enter the Spellchecker mode.
*If you want to adjust the contrast of the display again, press 
.
Select “ LCD Contrast” by using 
or 
. ( See page 53. )
8 | 9 |
