Sennheiser 100-P SERIES SK 100 G3 bodypack transmitter

Putting the devices into operation

SK 100 G3 bodypack transmitter

Inserting the batteries/accupack/Charging the accupack

The procedure is the same as for the EK 100 G3 diversity receiver:

To insert the batteries/accupack:

Read the chapter “Inserting the batteries/accupack” on page 10.

To charge the accupack:

Read the chapter “Charging the accupack” on page 10.

Connecting the microphone cable/line cable

The audio input is designed for the connection of condenser microphones. DC powering of the condenser microphones is via the audio input MIC/LINE  (3.5 mm jack socket).

Use one of the recommended Sennheiser microphones or the optional CL 2 line cable.

 Connect the 3.5 mm jack plug  from the Sennheiser cable to the 3.5 mm jack socket MIC/LINE .

		Lock the 3.5 mm jack plug by screwing down the coupling ring  of the cable.
		Via the operating menu, adjust the sensitivity of the microphone/line input.





Attaching and positioning the corresponding microphones

ME 2/ME 4  Use the microphone clip  to attach the microphone to clothing (e.g. tie, lapel).

The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional pick-up pattern. It is therefore not necessary to position it precisely.

 Attach the ME 2 microphone as close as possible to the sound source.

	The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up
	pattern.

Position the ME 4 microphone so that its sound inlet is directed towards the sound source (e.g. mouth).

12