Putting the devices into operation

 

Changing the color-coded protection ring

The color-coded protection ring

prevents the multi-function switch from accidental

operation. Protection rings in different colors are available as accessories. The protection rings allow you to clearly identify each radio microphone.

Remove the color-coded protection ring as shown in the left-hand diagram.

Put on a new protection ring as shown in the right-hand diagram.



SKP 100 G3 plug-on transmitter

Inserting the batteries/accupack

For powering the plug-on transmitter, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack.

Slide the battery compartment cover in the direction of the embossed arrow and open the cover.

Insert the two batteries or the accupack as shown below. Please observe correct polarity when inserting the batteries/accupack.

Close the battery compartment.

The battery compartment cover locks into place with an audible click.

Charging the accupack

Remove the BA 2015 accupack (optional accessory).

Insert the BA 2015 accupack into the L 2015 charger (accupack and charger are optional accessories):

The L 2015 charger can only charge the BA 2015 accupack. Standard batteries (primary cells) or individual rechargeable battery cells cannot be charged.

15