Putting the components into operation
Setting up the charging case
Note:
The charging case as well as the accupacks and the receivers’
y The air vents of the charging case must not be covered or blocked.
y The charging case must be kept away from heat sources and must never be exposed to direct sunlight.
y During charging, do not put the case cover on the charging case.
The charging case has four plastic feet to ensure that it cannot slip on the surface on which it is placed.
Caution! Some furniture surfaces have been treated with varnish, polish or synthetics 
which might cause stains when they 
come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out
the possibility of staining.
Place the charging case on a flat, even surface.
Connect the supplied mains cable to the IEC mains socket on the charging case.
Connect the cable to the mains.
Note:
The case cover can be used as a stand for the charging case (see diagram on the left).
22
