Sennheiser 2020 manual Using the components, Switching the devices on/off

￿

CH 03

LINE

MIC

Using the components

Switching the devices on/off

Switching the transmitter on/off

To switch the transmitter on:

Briefly press the ON/OFF button .
The LC display	indicates the device name and
then switches to the standard display.
To switch the transmitter off:
Press and hold the ON/OFF button		until “OFF“
appears on the display.

Note:

Remove the batteries or the accupack when the transmitter will not be used for extended periods of time.

Muting the transmitter

To temporarily mute the transmitter’s microphone input:

Set the MUTE switch to the position “MUTE“.

The red LED LOW BATT/MUTE	lights up
permanently. The MIC level display	no longer

shows any deflection. The transmitter’s micro- phone input is muted.

Note:

The muting function (MUTE) mutes the microphone input but not the line input . This function enables a pre-recorded track to be played through the line input without being disturbed by the tour guide’s microphone. When the track has finished, the guide can un-mute the microphone and continue talking.

To deactivate the muting function:

Set the MUTE switch		back to the right.
The red LED LOW BATT/MUTE			goes off. The MIC
level display	and	the LINE	level display
indicate the current levels.

25