CH 03
LINE
MIC
Press the SET button | to permanently store the |
setting. |
|
“STORED” briefly appears on the display.
Adjust the sensitivity of the line input to match the connected audio source as described in the following section.
Changing the sensitivity of the line input
To adjust the sensitivity of the line input to match the connected audio source:
Make sure that the line input is switched on (see previous section).
Connect the external audio source, switch it on and start playback.
Press the SET button .
The operating menu appears and the first menu “CHAN” flashes on the display.
Repeatedly press the / rocker button until “SENSIT“ flashes on the display and the LINE level display appears.
Press the SET button .
The current input sensitivity and the LINE level
display | appear on the display. |
|
Press the | / rocker button | to change the |
input sensitivity so that the LINE level display shows full deflection during the loudest passages,
but the yellow LED PEAK | never lights up. |
Press the SET button | to permanently store the |
setting. |
|
“STORED” briefly appears on the display, indicating that the sensitivity of the line input has been stored.
34
