Setting a channel
To set the complete system to a certain channel, proceed as follows:
1.Set the transmitter to the desired channel (see “Setting the transmission channel” on page 30).
2.Set one of the receivers to the same channel (see “Setting the receiver channel” on page 31).
3.Automatically set all other receivers to the same channel using the channel copy function (see “Setting the receiver channel(s) using the channel copy function” on page 32).
Setting the transmission channel
To set the transmitter to the desired channel, use the transmitter’s operating menu. An overview of the transmitter’s operating menu is given on page 41.
Make sure that the lock mode is deactivated (see “Activating/deactivating the lock mode” on page 37).
Press the SET button .
The operating menu appears and the first menu “CHAN” flashes on the display.
Press the SET button .
The current channel flashes on the display.
Select a different channel by pressing the / rocker button .
By pressing the position (UP) of the / rocker button , the display jumps to the next channel; by pressing the position (DOWN) of the / rocker button , the display jumps to the previous channel.
By pressing and holding the / rocker button , the display cycles continuously (repeat function).
30
