Connecting the ADN-W AM antenna module to the ADN CU1 central unit

Connecting the ADN-W AM antenna module to the ADN CU1 central unit

￿Use a system cable (supplied with the ADN-W AM; the maximum cable length allowed is 50 m) to connect the PORT II socket 8 or PORT I socket 9 of the ADN CU1 central unit to the input socket 4 of the antenna module.

If the power supplied to the antenna module via the system cable is not sufficient (the antenna module does not switch on), you have to power the antenna module using the NT 12-50C power supply (see page 6).

Optionally, you can also connect the antenna module to the PORT sockets of an ADN PS power supply. It does not matter if you are using a string or ring topology. The antenna module is connected just like a conference unit to the cable string or cable ring.

ADN CU1

 

ADN-W AM

IN –– AUDIO –– OUT

 

 

 

 

 

PORT II PORT I

 

3

4

 

 

100-240V~

 

 

50/60Hz 240W

 

 

8

9

 

 

 

 

PORT II

PORT I

 

 

To optionally combine the antenna module with wired conference units, connect the antenna module just like a wired conference unit:

￿Use a system cable to connect the output socket 3 of the antenna module to the IN socket of an ADN D1 or ADN C1 wired conference unit.

Or:

￿Use a system cable to connect the OUT socket of an ADN D1 or

ADN C1 wired conference unit to the input socket 4 of the antenna module.

10 ADN-W AM