Preparing the antenna module for operation

Connecting the antenna module to the mains power supply

The antenna module is powered from the ADN CU1 central unit via the SBC CBL RJ45 system cable.

If the power supplied via the system cable is not sufficient and if the antenna module is not listed in the central unit‘s operating menu under “System Menu” > “Versions” > “Hardware Version Info” or “Software Version Info”:

 

 

 

Software Version Info

 

Main menu

 

 

 

Hardware Version Info

 

 

 

 

CU1 SB:

1

System menu

 

 

 

ADN PS:

1

 

Versions

 

 

 

AM

1

 

 

 

 

No

￿Use the optional NT 12-50C power supply.

CAUTION

Product damage due to an unsuitable power supply!

If you use an unsuitable power supply, this can cause damage to the ADN-W AM antenna module.

￿Only connect the NT 12-50C power supply to the antenna module.

￿Connect the hollow jack plug 2 of the NT 12-50C power supply to the hollow jack socket 5.

EU

UK

US

3

5

 

 

2

NT 12-50C

2￿ Pass the cable through the cable grip 2 as shown.

￿Connect the Euro 8 connector of the mains cable to the socket 3 of the NT 12-50C power supply.

￿ Connect the mains plug of the mains cable to a wall socket.

6 ADN-W AM