Sennheiser ADN-W AM Switching the antenna module on/off

Switching the antenna module on/off

ADN CU1	ADN PS		ADN PS
PORT I/PORT II	PORT I/PORT II		PORT I/PORT II
	1 2	1 2	1	2
				OUT
				...20
				IN
IN		IN
...20		...20
OUT		OUT

Switching the antenna module on/off

The antenna module is connected to the ADN CU1 central unit and automatically switches on when the central unit is switched on.

To switch the antenna module on:

￿Set the on/off switch 1 of the ADN CU1 central unit to position “I”. The central unit switches on and its display panel lights up. The connected ADN-W AM antenna module is also switched on.

	ADN CU1	ADN-W AM
1	ON	ON

To switch the antenna module off:

￿Disconnect the system cable from the input socket 4 of the antenna module.

Or:

￿Set the on/off switch 1 of the ADN CU1 central unit to position “0”. The antenna module is switched off. The wireless conference units try to reconnect to the antenna module and automatically switch off after 5 minutes if no switched-on antenna module can be found.

ADN-W AM 11