Cleaning and maintaining the antenna module
one wireless conference system is in use and if the default eavesdropping protection is sufficient.
–Closed access mode (“Wireless Menu” > “Access Mode” > “Closed”)
Only wireless conference units whose serial numbers are listed in a participant list can be used in the wireless conference. If several wireless conferences are held simultaneously, the closed access mode ensures that the wireless conference units connect to the correct conference system. This access mode increases the pro- tection against eavesdropping because only selected and enabled wireless conference units can be used.
Further information on how to configure the wireless conference components can be found in the ADN system manual.
Cleaning and maintaining the antenna module
Only use a dry and soft cloth to clean the product.
Specifications ADN-W AM
RF frequency range | 2.4 GHz; 5.1 to 5.9 GHz | ||
|
|
|
|
RF output power | 25 to 100 mW (depending on the selected | ||
| country/region) | ||
|
|
|
|
Power supply | 12 to 15 V |
|
|
|
| ||
| alternatively via ADN PORT bus 52.8 V | ||
|
|
|
|
Power consumption | 6 W | ||
|
|
|
|
Antennas | 3 rod antennas with | ||
|
|
|
|
Transmission range | typ. 30 m | ||
|
|
|
|
Mounting thread | 5/8" and 3/8" thread insert | ||
|
|
|
|
Temperature range | operation: +5°C to +45°C | ||
| storage: | ||
|
|
|
|
Relative humidity | operation: 20 to 95% | ||
| storage: 10 to 90% | ||
|
|
|
|
Dimensions (W x H x D) | approx. 226 x 181 x 58 mm | ||
|
|
|
|
Weight | approx. 1,660 g | ||
|
|
|
|