Configuring the headset system

Adjusting the volume of the transmission

Adjusting the microphone volume of the call transmission

By default, the microphone volume control is set to position 4. This setting is suitable for most telephones.

￿Make a call to someone who will help you find the correct sensitivity setting for your microphone.

￿Turn the microphone volume control so that the other party can hear you at a comfortable level.

3 6

0 9

Mic. Volume

1 2 3 4 5 6

Settings

A

B

C

Mode

Adjusting the microphone volume of the USB transmission

Some softphones adjust the microphone sensitivity automatically.

￿Activate this function in order to be able to optimally use the microphone and, via your operating system, adjust the microphone sensitivity so that the other party can hear you at a comfortable level (see the Help function of your operating system).

Adjusting the volume of the ring tone

Adjusting the headset‘s ring tone volume and the volume of the acoustic signals

&

￿ Make sure that the headset is in standby mode (the Link LED on the

 

base station is off). If necessary, press the Link button on the headset.

￿ To adjust the volume, move the Audio button as shown in the diagram. When the minimum or maximum volume is reached, you hear a double beep in the headset.

Adjusting the ring tone volume of the base station

￿ Turn the volume control to reduce or increase the ring tone volume.

Ring Volume

36

09

Ring Volume

1 2 3 45 6

Settings

19 D 10 series