Sharing a workplace
Sharing a workplace
The headsets and base stations of the D 10 series are compatible with each other. If, for example, you share a workplace, you can use one base station with different headsets. The last headset paired with the base station can be used without more ado.
Place the headset to be used into the magnetic holder of the base station.
The Headset LED alternately flashes blue/red until the headset is successfully paired with the base station. The Headset LED flashes 3 times blue and then goes off. You can now use the newly paired headset.
If pairing has failed, the Link LED 
on the base station lights up red or is off. Repeat the procedure.
3x
Using the headset with a third party base station (DECT-GAP telephone)
Place the headset at a maximum distance of 1 m from the third party
5s
base station.
Simultaneously press and hold the headset’s Link button and Audio button for 5 seconds.
The headset switches to a special pairing mode and the Headset LED alternately flashes blue/red.
Set the third party base station to a special pairing mode (see the instruction manual of the third party base station). The default code for the headset is “0000”.
The headset pairs with the third party base station. If pairing is successful, the Headset LED goes off.
If pairing is not successful within 60 seconds, the headset switches back to standby mode.
To pair the headset again with a D 10 series base station:
Simultaneously press and hold the headset’s Link button and Audio button for 5 seconds.
The headset switches to a special pairing mode and the Headset LED alternately flashes blue/red.
Place the headset into the magnetic holder of the base station. The Headset LED flashes blue 3 times and then lights up blue. The base station and the headset are paired.
D 10 series 32