Making calls using the headset

Calling via the fixed line phone using the headset

Establishing/disconnecting a wireless link

If you want to use the headset to accept, make or end calls, you have to establish a wireless link between headset and base station. You can choose between manual and automatic link establishment (see “Auto Link” on page 17).

￿Press the Link button on the headset.

– The link is established. The Link LED

on the base station lights up

blue and the Headset LED flashes blue slowly.

OR

 

– The link is disconnected. The Link LED

on the base station and the

Headset LED go off. The headset is in standby mode.

connected disconnected

connected disconnected

If your telephone has a built-in electronic hook switch supporting the MSH standard, you can only disconnect the wireless link between headset and base station by placing the headset into the base station.

Managing calls without using a call control functionality

Accepting a call: You hear the ring tone of the fixed line phone. Press the Link button on the headset. Lift the handset or press the “accept call” button on your fixed line phone.

Making a call: Press the Link button on the headset to establish a link between base station and headset. Lift the handset and dial the desired number. The phone connection is established.

Ending a call: Hang up the handset or press the “end call” button on your fixed line phone.

23 D 10 series