Sennheiser D 10 Calling via the computer using the headset

Making calls using the headset

Calling via the computer using the headset

Establishing/disconnecting a wireless link

If you want to use the headset to accept, make or end calls, you have to establish a wireless link between headset and base station. You can choose between manual and automatic link establishment (see “Auto Link” on page 17).

￿Press the Link button on the headset.

–The link is established. The Link LED on the base station lights up blue and the Headset LED flashes blue slowly.

OR

–The link is disconnected. The Link LED on the base station and the Headset LED go off. The headset is in standby mode.

connected disconnected connected disconnected

Managing calls via the softphone

Accepting a call: The softphone signals that you are receiving a call. You hear a ring tone in the headset. Click on “Accept call” on your softphone.

Making a call: Press the Link button on the headset to establish a link between base station and headset. If the “Auto Audio” function is activated, this step is not necessary (see page 20). Start the call using your softphone.

Ending a call: End the call using your softphone.

25 D 10 series