Sennheiser EK 2000 Adjusting settings via the operating menu, The main menu “Menu”

Adjusting settings via the operating menu

Canceling an entry

ON/OFF ￿ Press the ON/OFF button to cancel the entry.

The current standard display appears on the display panel.

To subsequently return to the last edited menu item:

SET ￿ Press the SET button repeatedly until the last edited menu item appears.

Exiting a menu item

To return to the next higher menu level:

￿ Change to the “Exit” menu item.

Menu

Exit

SET ￿ Confirm your selection.

To directly return to the current standard display:

ON/OFF ￿ Press the ON/OFF button.

Adjusting settings via the operating menu

The main menu “Menu”

Synchronizing a transmitter with the diversity receiver – “Sync”

You can synchronize a suitable transmitter of the 2000 series with the receiver. By default, the following parameters are transferred to the transmitter during synchronization:

Setting Transferred parameters

“Frequency Preset” Current receiving frequency (see page 23)

“Name”Current name set for the receiver (see page 23)

“Pilot Tone” Current pilot tone setting of the receiver (“Inactive”/“Active”, see page 27)

19