Adjusting settings via the operating menu

Resetting the settings made in the operating menu – “Reset”

 

Advanced Menu

SET

 

 

 

Reset

 

Reset

 

 

 

 

Yes

 

 

Call up “Reset”

 

Select the desired

 

 

 

 

setting; apply the

 

 

 

 

setting

“Stored” SET

When resetting the settings made in the operating menu, only the selected settings for the pilot tone and for the frequency banks “U1” to “U6” remain unchanged. For an overview of the factory-preset default settings, refer to the enclosed frequency information sheet.

Displaying the software revision – “Software Revision”

You can display the current software revision of the diversity receiver.

The “Sync Settings” submenu

Display

Function

SK Settings

Calls up the “SK Settings” submenu

SKM Settings

Calls up the “SKM Settings” submenu

SKP Settings

Calls up the “SKP Settings” submenu

Exit

Exits the “Sync Settings” submenu and returns to the

 

extended menu “Advanced Menu”

 

 

“SK Settings”, “SKM Settings” and “SKP Settings”

Via the “SK Settings”, “SKM Settings” and “SKP Settings” submenus, you can set the transmitter parameters directly on the diversity receiver and activate or deactivate the transfer of these parameters to the transmitter.

Setting

Transfer is ...

 

 

Sensitivity

... activated

– 6dB Sync

Sensitivity

... deactivated

– 6dB Sync

28