Adjusting settings via the operating menu
The extended menu “Advanced Menu”
To get into the extended menu “Advanced Menu”:
From the main menu, select “Advanced”.
Setting the receiving frequencies and the frequency banks “U1” to “U6” – “Tune”
When you have selected one of the system banks and then select the “Tune” menu, the diversity receiver automatically switches to channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly appears on the display panel.
Upon delivery, the channels of the frequency banks “U1” to “U6” are not assigned a receiving frequency.
Via the “Tune” menu item, you can set a receiving frequency to be stored in the current channel or you can select a different channel in one of the frequency banks “U1” to “U6” and assign this channel a receiving frequency.
Setting a receiving frequency for the current channel
Press the rocker button until the “Tune” menu item appears.
SET | Press the SET button. |
|
|
|
|
|
| ||||||||
|
| The MHz section of the receiving frequency of the channel is | |||||||||||||
|
| highlighted. |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| SET |
| Tu n e | SET | ||||||||
| Advanced Menu |
|
|
| Tune | ||||||||||
| Tune |
|
|
|
| 823 | .925 MHz |
|
|
| 823. | 925 | MHz |
| |
|
| 823.925 MHz |
|
|
|
| B.Ch: U1. 1 |
|
| B.Ch: U1. 1 | |||||
Call up “Tune” | Select the frequency |
|
| Select the channel; | |||||||||||
(special function) | bank and confirm |
|
| store the setting | |||||||||||
“Stored”SET
It is vital to observe the notes on frequency selection on page 30.
Press the rocker button to set the MHz section of the frequency.
SET Press the SET button to confirm the MHz section of the 
frequency.
The kHz section of the frequency is highlighted.
Press the rocker button to set the kHz section of the frequency.
25