Using the MZA 900 P as a cable tester
The MZA 900 P can also be used as a cable tester for XLR microphone cables. For this, there is no need to connect a microphone.
Connect one end of the cable to be tested to a mixing console with activated phantom powering. Connect the other end of the cable to the MZA 900 P.
LED lights up in green:
yThe cable is OK
LED lights up in red. Possible errors:
yOne signal wire is broken
yOne signal wire is
LED does not light up. Possible errors:
yBoth signal wires are broken
yThe shielding is interrupted
yBoth signal wires are
5
