Putting the PXC 360 BT into operation
3h
1
3s
Putting the PXC 360 BT into operation
Before using the PXC 360 BT for the first time, remove the protection strip from the battery pack.
Charging the battery pack
Before using the battery pack for the first time, charge it for at least 3 hours. The battery pack can also be charged inside the headphones during operation.
When charging the battery pack, the LED on the battery pack lights up red. When the battery pack is fully charged, the LED on the battery pack lights up green.
When the battery pack is almost flat, the
LED flashes red. You hear a short, descending acknowledgement tone.
The operating time of the battery pack depends on the device settings, the listening situation and the audio sources used. The operating time will be reduced if you use SRS WOW HD.
Type of use | Operating time |
NoiseGard and Bluetooth technology | 8 hours |
|
|
NoiseGard without Bluetooth technology | 20 hours |
|
|
Bluetooth technology without NoiseGard | 10 hours |
|
|
Remove the battery pack if the headphones will not be used for extended periods of time.
9