Using the PXC 360 BT
Switching the TalkThrough function on/off
The PXC 360 BT provide excellent attenuation of ambient noise. The Talk- Through function allows you to communicate undisturbed with other people without having to remove the headphones even when NoiseGard is switched on.
To switch the TalkThrough function on:
Briefly press the NoiseGard button .
The
LED lights up red. The TalkThrough function is switched on.
To switch the TalkThrough function off:
Briefly press the NoiseGard button .
The
LED goes off. The TalkThrough function is switched off.
When the TalkThrough function is switched on, you cannot listen to music.
Switching the Bluetooth function on/off
Via the Bluetooth interface, the headphones can be connected to a wide variety of Bluetooth enabled devices.
To switch the Bluetooth function on: |
|
|
Press the Bluetooth button and keep it pressed until the | LED | |
flashes 3 times blue. The Bluetooth function is switched on. |
| |
|
| |
To switch the Bluetooth function off: |
|
|
Press the Bluetooth button and keep it pressed until the | LED | |
flashes 3 times red. You hear a descending beep. |
| |
The Bluetooth button goes off. The | LED flashes blue and the | |
Bluetooth function is switched off. |
|
|
Changing the volume
The PXC 360 BT allow you to change the volume of the audio signal:
Button Duration | Function | Button Duration | Function |
| Incrementally |
| Incremen- |
| increases the |
| tally reduces |
| volume |
| the volume |
| Continuously |
| Continuously |
1s | increases the | 1s | reduces the |
| volume |
| volume |
If you press the respective button briefly, the volume is changed incremen- tally; if you hold down the button, the volume is changed continuously.
When the minimum or maximum volume is reached, you hear an acknowledgement tone.
18