Putting the PXC 360 BT into operation

1

￿

￿

￿

Connecting the PXC 360 BT using the audio cable

Connecting the audio cable

You can connect the headphones to the audio source using the audio cable if:

•you do not want to use the Bluetooth function,

•you are not allowed to use the Bluetooth function (some airlines do not allow Bluetooth transmission)

or

•the battery pack is flat.

When the audio cable is connected to the headphones, the Bluetooth function cannot be switched on.

If the headphones are already connected to the audio source via the Bluetooth interface, the Bluetooth connection is automatically disconnected when you connect the audio cable. The LED ￿ flashes 3 times red and you hear a descending beep.

￿Connect the 2.5 mm jack plug of the audio cable to the socket ￿of the headphones.

￿Connect the 3.5 mm jack plug of the audio cable ￿ to

–the headphone socket of your audio source or

–the audio adapter for ¼” (6.35 mm) jack socket ￿if the 3.5 mm jack plug of the audio cable is too small

–the in-flight adapter ￿ if you want to use the headphones with an in-flight entertainment system.

1

When the audio cable is connected to your audio source, you hear the

 

sound from your audio source and the LED ￿ flashes blue.

Detaching the audio cable

If you want to use the PXC 360 BT as Bluetooth headphones only, you can detach the audio cable ￿.

￿Pull the 2.5 mm jack plug of the audio cable ￿ from the socket ￿ of the headphones.

When detaching the audio cable, the Bluetooth function is not automatically switched on.

￿Switch the Bluetooth function on again (see “Switching the Bluetooth function on/off” on page 18).

16