1
5 
Putting the PXC 360 BT into operation
Disconnecting the Bluetooth connection
The Bluetooth button is backlit, indicating the current setting. The backlighting goes off after a short time to conserve energy.
Press any button on the headphones to display the current setting of the Bluetooth function.
To disconnect the Bluetooth connection to the audio source, you can switch off the headphones or the Bluetooth function. This setting is retained until the Bluetooth function is switched on again.
To switch the headphones off:
Press the Master button and keep it pressed until the 
LED flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically deactivated. The headphones switch off.
To switch the Bluetooth function off:
Press the Bluetooth button and keep it pressed until the 
LED flashes 3 times red. You hear a descending beep.
The Bluetooth button goes off. The Bluetooth function is switched off.
15