Sennheiser SKM 3072-U manual Suitable Sennheiser receivers, Recommended accessories

￿

￿

￿ ￿

18Locking the POWER button / “Lock mode” function

You can lock the POWER button of your SKM 3072-U to prevent accitental switching off by a user inexperienced in handling the transmitter.

Locking the POWER button

Press the SET button to get into the setting mode.

If you press SET three times, “Loc” begins to flash on the display.

Press the SET button for more than a second to store your setting. “Sto” briefly appears on the display, indicating that the new setting has been stored. The display then switches back to the standard display.

The POWER button is now locked. If POWER is accidentally pressed, the display briefly indicates “Loc” and then switches back to the standard display. With the / buttons, however, you can still choose the content of the display i.e. whether the transmission frequency or the channel number is displayed.

Unlocking the POWER button

When briefly pressing SET, “Loc” begins to flash on the display.

Now press the SET button for more than a second.

The display switches back to the standard display and the buttons can now be operated as usual.

19 Suitable Sennheiser receivers

Your SKM 3072-U hand-held transmitter optimally matches any of the Sennheiser 3000 series receivers.

￿	EM 3031	Cat. no. 04000
￿	EM 3032	Cat. no. 04200
	EM 3532	Cat. no. 04400 (not pictured)

The SKM 3072-U can also be used with any receiver of the 1000 and 5000 series, receivers of the 1000 series, however, cannot receive the battery status information.

The frequencies of your SKM 3072-U are pre-programmed by the factory. In case you want to change these frequencies, please contact your Sennheiser distributor who has the required specialist equipment.

20 Recommended accessories

￿ME 3005 microphone head, for presentations Cat. no. 04573

￿ MZW 4032 A windshield, anthracite Cat. no. 02978

￿MZW 4032 windshield with

colour-coded identification rings, various colours

38 39