PLAY (4) Button
PLAYBACK EFFECT
4OFF
1 CLASSIC FILM
2B/W MONOTONE
3 SEPIA
4 STROBE
5VIDEO ECHO
PLAYBACK EFFECT
Select Menu
Power Switch
EN47
Playback Special Effects
These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.
1 START PLAYBACK
Press PLAY (4).
2 ACCESSMENU PLAYBACK EFFECT SELECT
Point the remote control at the camcorder’s remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears.
3 SELECT PLAYBACK EFFECT
Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears.
NOTES:
● To deactivate the selected effect, press EFFECT ON/OFF |
on the remote control. Pressing it again |
selected effect. |
● Repeat from step 2 when you want to change the |
selected effect. |
● When “MONOTONE” or “SEPIA” is activated, the |
Remote sensor
“MULTI 4” and “MULTI 9” Snapshot modes (☞ pg. 21) |
are not available. |
The effects that can be used during playback are Classic Film, Monotone, Sepia and Strobe. The effects work the same in playback as they did in recording. Refer to page 29 for more information.
T W
PLAY
EFFECT
EFFECT ON/OFF