42
EN
TAPE
DUBBING
PLAY/PAUSE (4/6) Button
Power Switch
|
| Connector | |
Connector cover* | cover* | ||
| |||
To | Yellow | Red to Audio | |
to Video | |||
Output R | |||
OUT | Output | ||
| |||
|
| White to Audio | |
|
| Output L | |
A/V cable (provided)
To AUDIO, VIDEO and S
“Y/C”/“CVBS” | If your VCR | |||
has the SCART | ||||
video out select |
|
| ||
|
| connector, use | ||
switch | ||||
the provided | ||||
|
|
| ||
|
|
| cable adapter. | |
|
|
| ||
VCR
(Recording deck)
TV |
*When connecting the cables, open this cover.
Tape Dubbing
1 CONNECT EQUIPMENT Following the illustration at left, connect the camcorder and the VCR. Also refer to pg. 40 and 41.
2 PREPARE FOR DUBBING
Set the camcorder’s Power Switch to “PLAY”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3 SELECT VCR MODE
Engage the VCR’s AUX and
4 FIND EDIT-IN POINT
Engage the camcorder’s Play mode to find a spot just before the
5 START EDITING
Press PLAY/PAUSE (4/6) on the camcorder and engage the VCR’s Record mode.
6 STOP EDITING TEMPORARILY Engage the VCR’s
7 EDIT MORE SEGMENTS
Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
●You can use Playback Zoom (☞ pg. 46) or Playback Special Effects (☞ pg. 47) in step 5.
●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do appear during dubbing, they are being recorded onto the new tape.
To clear the Playback Sound Mode Display, press DISPLAY on the
●Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 38) to show or hide the Date/Time and the Time Code on the recording.
●To show or hide all indications, press DISPLAY on the camcorder for longer than 1 second.
●Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
