24
EN
RECORDING
Advanced
Features
(cont.)
Date/Time Menu Explanations
ON SCREEN | OFF | Keeps the camcorder's display from appearing on the connected TV |
|
| screen. |
| ON | Makes the camcorder's display appear on screen when the camcorder |
|
| is connected to a TV. |
|
|
|
DISPLAY | ON | Makes the date/time settings appear in the camcorder (☞ pg. 19). |
| OFF | Keeps the date/time settings from appearing in the camcorder. |
|
|
|
DATE/TIME | Allows you to set the current date and time (☞ pg. 9). | |
|
|
|
System Menu Explanations |
| |
|
|
|
PHOTO MODE | Allows you to set the parameters for “FULL”, “FRAME”, | |
| “MULTI 9” recording (☞ pg. 20). | |
|
|
|
TALLY | ON | The tally lamp comes on to signal the start of recording. |
| OFF | The tally lamp remains off at all times. |
|
|
|
WIND CUT | OFF | Disengages the function which cuts down on noise created by wind. |
| ON | Helps cut down on noise created by wind. |
|
| •“ ” appears. |
|
| •The quality of the sound will change. This is normal. |
|
|
|
SOUND MODE | 32 kHz | Enables recording of stereo sound on four separate channels, and is |
|
| recommended for use when performing audio dubbing. |
| 48 kHz | Enables recording of stereo sound on two separate channels. |
|
|
|
ID NUMBER | This number is necessary when connecting the camcorder to a device such as a | |
| computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting | |
| is 07. |
|
|
|
|
DEMO. MODE | OFF | Automatic demonstration will not take place. |
| ON | Demonstrates certain functions such as Programme AE with special |
|
| effects, etc., and can be used to confirm how these functions operate. |
|
| When “DEMO. MODE” is set to “ON” and the Recording Menu is |
|
| closed, demonstration starts. |
NOTES:
●If a tape is in the camcorder, the demonstration cannot be turned on.
●By turning off the camcorder, “DEMO. MODE” is set to “OFF” automatically.
:
