JVC LYT0242-001A manual Date/Time Settings, Select Operation Mode, Access Recording Menu

MENU Button

Power lamp

Select Dial Power Switch

	Display
REC MODE		SP	Recording Menu
WIDE MODE		OFF
ZOOM		64X
GAIN UP		AGC
TELE MACRO		OFF
4TO DATE / TIME MENU
TO SYSTEM MENU
		DEC 25 ’ 98
		: 30
END	– – – – –6– – – – –

Date/Time Menu

	ON SCREEN	OFF
	DISPLAY	ON
4	DATE / TIME	1 . 1 . 00
	RETURN	00 : 00

EN9

Date/Time Settings

Date and time will automatically be recorded on tape at all times. It is your choice to display it or not during playback (☞ pg. 39).

SELECT OPERATION MODE

	turned on.	STARTED
1 Set the Power Switch to “PRO.”.
	•The power lamp comes on and the camcorder is
		GETTING
	ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears.
	ACCESS DATE/TIME MENU
3 Move the highlight bar to “TO DATE/TIME MENU”
	by rotating the Select Dial. Press the Select Dial and
	the Date/Time Menu appears.
	INPUT DATE AND TIME
4 Move the highlight bar to “DATE/TIME” by rotating
	the Select Dial. Press the Select Dial and “day” is
	highlighted and begins blinking.
	Rotating the Select Dial, input the day. Press the
	Select Dial. Repeat the procedure to input the month,
	year, hour and minute.
	•Press the Select Dial twice when the highlight bar is
	set to “RETURN” to exit.
NOTE:

Even if you select “DATE/TIME”, if the parameter is not highlighted the camcorder's internal clock continues to operate. Once you move the highlight bar to the first date/ time parameter (day), the clock stops. When you finish setting the minute and press the Select Dial, the date and time begin operation from the date and time you just set.