JVC LYT0242-001A manual EN31, Manual Focus, Select Operation Mode, Access Manual Mode Item Menu

Select Dial

Display

4FOCUS		MANUAL
EXPOSURE		AUTO
W. BALANCE		AUTO
FADER		OFF
	/ WIPE
P. AE		OFF
	/ EFFECT
RETURN
FOCUS

FOCUS

Power Switch

Manual Mode Item Menu

EN31

MANUAL FOCUS

NOTE:

You should already have made the necessary viewfinder adjustments (☞ pg. 12). If you have not, do so before continuing.

1	SELECT OPERATION MODE
	Set the Power Switch to “PRO.”.
2
	ACCESS MANUAL MODE ITEM MENU
	Press the Select Dial. The Manual Mode Item Menu
	appears.
3
	ACCESS MANUAL FOCUS
	Move the highlight bar to “FOCUS” by rotating the
	Select Dial, then press it. Rotate the Select Dial to
	display “MANUAL”, then press it. The Manual Mode
	Item Menu disappears and “FOCUS” is displayed in
	the upper left corner. The focus is locked at this point.
4
	ADJUST FOCUS
	To farther subject . . .
		RECORDING
	.... rotate the Select Dial upward. “ ” appears and
	blinks. Go to step 5.
	To nearer subject . . .
	.... rotate the Select Dial downward. “ ” appears
	and blinks. Go to step 5.
5
	END ADJUSTMENT OF FOCUS
	Press the Select Dial. Focus adjustment is complete.
	The indication changes from “FOCUS” to “PRO.”.
	•If you want to reset the focus, repeat from step 2.
To Change To Auto Focus . . .
.... rotate the Select Dial to display “AUTO” then press it
in step 3. The manual focus indicators disappear. Or
set the Power Switch to “AUTO”.
NOTES:

●After the Power Switch is set to “OFF”, Manual Focus is reset to “AUTO”.

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.

●When the focus level cannot be adjusted any farther or closer, “ ” or “ ” will blink.