26
EN
RECORDING
Advanced
Features
(cont.)
Recording Start/Stop Button
Previous scene end
[Ex.: 
P WIPE – SCROLL]
Within 5 minutes . . .
PICTURE WIPE OR DISSOLVE SELECTION (
P, 
P, 
P, 
P , 
P, 
P and 
P)
Combine the Picture Wipe and Dissolve functions for a professional transition effect. There are 6 Picture Wipe effects and 1 Dissolve effect. The Picture Wipe or Dissolve works when recording is started.
Before the following steps, perform steps 1 through 3 on pg. 25.
4 STORE SCENE IN MEMORY Engage the
If you select Picture Wipe/Dissolve during recording . . .
.... press the Recording Start/Stop Button when one
scene is finished. The point at which the scene ended is stored in memory.
If you select Picture Wipe/Dissolve during Record- Standby mode . . .
.... press the Recording Start/Stop Button to start
recording and press it again when one scene is finished. The point at which the scene ended is stored in memory.
If you select Picture Wipe/Dissolve during Record- Standby mode after performing a Picture Wipe/ Dissolve . . .
.... the point at which the scene ended is already
stored in memory.
5 START RECORDING
If you start recording a new scene within 5 minutes of the end of the previous recording (without having turned the camcorder’s power off), the previous scene wipes out, revealing the new scene.
NOTES:
●You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/Stop Button.
●If the power is turned off after a scene is finished recording, the stored point is erased.
This disables the Picture Wipe/Dissolve combination. When this happens, the Picture Wipe/Dissolve indicator blinks. Try recording again, but do not turn the power off when you are finished. Please be advised that power also shuts off automatically if 5 minutes elapse in the
●The sound at the end of the last recorded scene is not stored.
