JVC LYT0242-001A Battery pack, etc., clock, If the indication remains, Even though you repeat

60EN

TROUBLESHOOTING(cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
31. An error indication	31. •A malfunction of some kind	31. • Remove the power supply
(E01 — E06) appears.	has occurred. In this case the	(battery pack, etc.), clock
	camcorder’s functions	battery and wait a few
	become unusable.	minutes for the indication to
		clear. When it does, you can
		resume using the camcorder.
		If the indication remains
		even though you repeat the
		above two or three times,
		please consult your nearest
		JVC dealer.
32. The charge indicator on	32. •The temperature of the	32. • To protect the battery, it is
the AC Power Adapter/	battery is extremely high/low.	recommended to charge it in
Charger does not light.	•Charging is difficult in places	places with a temperature of
	subject to extremely high/low	10°C to 35°C (☞ pg. 67).
	temperatures.
33. The recording mode	33. •This occurs when recording	33.
indicator “LP” blinks.	in the LP mode is not
	available. After the indicator	————
	blinks, the recording mode
	switches to “SP” and
	recording goes on.
34. Picture does not appear in	34. •The lens cover is closed.	34. • Open the lens cover
the viewfinder.		(☞ pg. 14).
35. When the image is printed	35. •This is not a malfunction.	35. • By recording with Picture
from the printer, a black		Stabilizer activated
bar appears at the bottom		(☞ pg. 16) this can be
of the screen.		avoided.
36. The power lamp blinks.	36. •The camcorder was turned	36. • Replace with a charged
	on when the battery power	battery pack (☞ pg. 6)
	was almost gone.
37. There are disturbances in	37. •If Audio Dubbing has	37. • Use a new, or infrequently
audio.	been performed	used, tape for Audio
	repeatedly on the same	Dubbing (☞ pg. 54, 55).
	portion of the tape,
	disturbance to the sound
	may result.