Putting the SR 2020 D into operation

When using several transmitters simultaneously, make sure that, in order to avoid interference, the distance between the antennas is sufficient. If necessary, use active transmitter combiners (see “Accessories and spare parts” on page 25):

You mount...

Active Transmitter Combiner

... 1 transmitter

AC 2

 

 

... 2 transmitters

AC 3200

 

 

Mounting two SR 2020 D side by side



 

Place the two transmitters side by side upside-down onto a flat surface.

Align the jointing plate  over the holes in the bottom sides of the transmitters.

Secure the jointing plate  to the transmitters using eight of the supplied recessed head screws (M 3x6).

Hook the two rack mount “ears”  to the front panels of the transmitters.

Secure the rack mount “ears”  to the transmitters using two of the supplied recessed head screws (M 3x6) respectively. If you wish to mount the antenna connections to the front of the rack, use the rack mount “ears” of the optional GA 3030 AM antenna mount .

Slide the transmitters into the 19” rack.

Secure the rack mount “ears”  to the rack.

11