Sennheiser SR 2020 D Connecting the transmitter to the mains, Connecting external devices

Putting the SR 2020 D into operation

Mounting only one When mounting only one transmitter into the rack, use the SR 2020 D blanking plate  instead of the second transmitter.









Hook the two rack mount “ears”  to the front panel of the transmitter.

Secure the rack mount “ears”  to the transmitter using two of the supplied recessed head screws (M 3x6) respectively.

Secure the blanking plate  to one of the rack mount “ears”  using two of the supplied recessed head screws (M 6x10).

If you are not front mounting the BNC output connector, insert the two blanking plugs  into the holes of the blanking plate.

Slide the transmitter into the 19” rack.

Secure the rack mount “ears”  to the rack.



2

Connecting the transmitter to the mains

Pass the cable through the cable grip .

 Connect the cable of the mains unit to the DC IN socket of the transmitter.

Plug the mains connector into the wall socket.

Connecting external devices

You can connect either a microphone (Mic) or an external audio source (Line, e.g. CD or MP3 player) to the transmitter.

To do so, use a suitable audio cable with a length of up to 3 m.

12