The HTML interface is constructed of three major components: the System Location bar, the
User/Navigation bar and the Control Screen. The System Location bar displays the Sentry’s location
and IP address as well as the current Control Screen title. The User/Navigation bar displays the current
user and privilege level and provides access to all HTML pages. And the Control Screen is used to
display current data and allow changes to outlet states or system configuration.
The following sections describe each interface section/page and their use.
User/Navigation System Location Control Screen
Figure 3.1 Example HTML page
Logging In
Logging in through HTML requires directing the HTML client to the configured IP address of the unit.
To log in by HTML:
1. In the login window, enter a valid username and password and press OK.
If you enter an invalid username or password, you will be prompted again.
You are given three attempts to enter a valid username and password combination. If all three fail,
the session ends and a protected page will be displayed.