Sentry Industries PT40 Sentry Commander - PT40 Operations 19 Installation and Operations Manual

Configuring input feed traps:
Click on the Input Feed Traps link.
On the subsequent Input Feed Traps page, select or deselect the desired traps and press Apply.
For Load traps, enter a maximum load value for the infeed in the High Load Threshold field and press Apply.
The High Load Threshold value may be 0 to 255 (in amperes).
Configuring outlet traps:
Click on the Outlet Traps link.
On the subsequent Outlet Traps page, select or deselect the desired traps and press Apply.
Tools
The Tools section contains access to rebooting the unit, uploading new firmware as well as resetting the unit to
factory defaults. This section is available to administrative level users only.
Restart
Performing a warm boot:
Select the Restart from the Action drop-down menu and press Apply.
Note: System user/outlet/group configuration or outlet states are NOT changed or reset with this command.
Resetting to factory defaults:
See Appendix A: for more information on resetting a Sentry to factory defaults from the HTML interface.
Uploading new firmware:
See Appendix B: for more information on uploading new firmware from the HTML interface.
Sentry Commander - PT40 Operations • 19
Installation and Operations Manual