Servis FS-1016MT, FS-1008MT, FS-1004MT user manual Host Switching Switching Via Keyboard

Models: FS-1004MT FS-1008MT FS-1016MT

1 32
Download 32 pages 40.12 Kb
Page 15
Image 15

8.If a cascade-connected master channel or any slave channel is selected, while the <Shift> key is pressed the OSD screen switches from “3-character master/14-character slave” mode back to “14-character master/5-character slave” mode. The OSD reverts to normal 3/14 mode when the <Shift> is released.

Cascade-connected master channel selected

Slave channel selected

b)Host Switching [Switching Via Keyboard]

1.Use the <↑> & <↓> cursor keys to select a host (channel) on the left side of the OSD.

2.If a cascade-connected channel is selected, the state of the selected slave device is shown on the right side of the OSD.

3.If a cascade-connected channel is selected, pressing the <→> cursor key causes control to switch to the right (slave) side of the OSD, with the currently selected cascaded host shown in purple. Press the <←> cursor key to return control to the left (master) side of the OSD.

4.On the right side of the OSD, use the <↑> & <↓> cursor keys as before to select a cascaded host (channel).

5.Press the <Enter> key to actually effect the console switch to the selected host. The name of the host switched to is shown at the top-left of the screen for about 3 seconds after the switch is effected.

Press the <Esc> key to escape the Hot Key Mode without switching the console.

14

Page 15
Image 15
Servis FS-1016MT, FS-1008MT, FS-1004MT user manual Host Switching Switching Via Keyboard