OPERATION

OPERATION

It is important to keep the bucket level when approaching a bank or pile. This will help prevent gouging the work area.

PEELING AND SCRAPING

Use a slight bucket angle, travel forward and hold lift control forward to start the cut. Make a short 5 to 8 foot angle cut and break out cleanly.

With bucket level, start a cut at notch approximately 2 inches deep. Hold depth by feathering bucket control to adjust cutting lip up or down. When front tires enter the notch, adjust lift cylinder to maintain proper depth.

1585 01/11

Operation Section 4-32

© 2010 Alamo Group Inc.

Page 78
Image 78
Servis-Rhino F-4123C manual Peeling and Scraping