Maintenance & Care - General
General Safety and Accident Prevention Advice
1Make sure that if the tractor remains attached to the drill that the ignition key is removed.
2During maintenance the drill should be supported in such a manner that if hydraulic failure was to occur the machine would still be adequately supported.
3Wear gloves when handling components with cutting edges such as worn discs etc...
4Disconnect the electrical supply from the tractor before doing any electrical maintenance.
5Refer to safety sections for more safety information.
General Cautionary Maintenance Advice
1Electric Welding - With the electronic equipment in modern tractors it is advisable to completely disconnect the implement from the tractor, or at the very least disconnect the alternator before attempting any welding.
2Water Blasting - Water blasting, steam cleaning or other pressurised cleaning processes can force dirt etc. into undesirable places that may cause damage or rapid part wear to items such as bearings, seals, chains, bushes etc. Caution must be exercised.
3Box set lifting eye profile - these profiles are are provided for easy removal of the dual boxes from the pedestals. Do not use when boxes are loaded nor to lift the machine.
Pt. No. 67372
Issue 0806
25
