PRESSURE WASHER Troubleshooting Guide
12
Troubleshooting
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
OIL SQUIRTS OUT | Pump over filled with oil | Maintain oil level at red dot on sight glass at | |
OF OIL CAP ON |
| rear of pump or at top of notch on dipstick. | |
PUMP |
|
| |
ENGINE OPERATES | Not enough gas or engine oil | Fill tank with gas. Check oil level. | |
FOR 15 MIN. THEN |
|
| |
Vapor lock developed by heat of | Keep gas tank full to avoid vapor locking. | ||
STOPS | |||
| day |
| |
|
|
| |
| Obstruction in fuel filter | Clean or replace fuel filter. | |
|
|
| |
WATER DRIPPING | Piston packing worn | Call technical support. | |
FROM UNDER PUMP |
|
| |
Call technical support. | |||
|
|
| |
| Cracked piston | Call technical support. | |
|
|
| |
OIL DRIPPING | Oil seal worn | Call technical support. | |
|
|
| |
WATER LEAKING | Spray gun closed with machine | Open spray gun or turn off machine. | |
FROM PUMP | running 2 minutes or longer |
| |
PROTECTOR |
|
| |
Excess water supply pressure | Place a pressure regulator at end of 50' | ||
| |||
|
| garden hose. | |
|
|
|
