Shark BG-3735, BG-2820, BG-2527, BG-3030, BG-3040, BG-3532 owner manual Nozzles

operating instructions (cont.)

OPERATOR’S MANUAL PRESSURE WASHER

On-Off

Switch

STEP 8: Turn the engine switch to "On" position.

On Briggs engines, move the throttle lever to "Fast" position, shown on engine as a rabbit.

STEP 9: Pull the starter grip. If the engine fails to start after 2 pulls, squeeze the trigger gun to release pressure and repeat step. Return starter gently. After the engine warms up enough to run smoothly, move choke to run position and throttle to fast position.

CAUTION: Small engines may kick back. Do not hold pull starter grip tightly in hand.

Safety

Latch

WARNING! Never replace nozzles without engaging the safety latch on the spray gun trigger.

NOZZLES

The five color-coded quick connect nozzles provide a wide array of spray widths from 0° to 45° and are easily accessible when placed in the convenient rubber nozzle holder, which is provided on the front of the machine.

NOTE: For a more gentle rinse, select the white 40° or green 25° nozzle. To scour the surface, select the yellow 15° or red 0° nozzle. To apply de- tergent select the black nozzle.

97-707 • BG • REV. 7/06