DIRECTIVES D’USAGE

OPERATING INSTRUCTIONS

AVERTISSEMENT: Toujours débrancher l’aspirateur avant l’assemblage ou l’enlèvement d’accessoires.

EXTENSION DU TUBE

TÉLESCOPIQUE

Appuyez sur le bouton en plastique et tirez sur le tube le plus petit. Voir l’illustration ci-dessous.

INSÉRER LE TUBE

TÉLESCOPIQUE DANS LE

BOÎTIER PRINCIPAL

•Insérez le tube télescopique dans l’orifice situé près de la poignée de la coupelle. Assurez-vous que la fente de la poignée s’insère bien dans l’orifice (Fig. 1).

•Pour enlever le tube télescopique, appuyez sur le bouton de relâche du tube télescopique et tirez le tube vers le haut.

FIXATION DE LA BROSSE À PLANCHERS AU BOÎTIER PRINCIPAL

•Insérez le brosse au bon endroit, dans le sens de la flèche.

•Pour retirer la brosse du boîtier principal, appuyez sur le bouton de relâche de la brosse et tirez la brosse du boîtier. (Fig. 2)

Fig. 2

FIXATION DU BOYAU AU

BOÎTIER PRINCIPAL

•Tenez l’extrémité du boyau. Insérez le boyau dans le raccord du boyau (Fig. 3).

Emptying the Dust Cup Container

and Cleaning / Changing the Non-

Woven Pre-Filter, HEPA Filter &

Debris Screen

Warning: Always unplug the unit from electrical outlet before opening the Dust Cup (container).

Important: Do NOT use the vacuum without the HEPA filter in place.

Warning: After each Use - Always remove Filter Assembly and the Dust Cup Cover with the Debris Screen, then vigorously “TapClean” HEPA Filter and clean Debris Screen and Non-Woven Pre-Filter until no more dust can be removed.

IMPORTANT, Please Note: The “TapClean” HEPA Filter will stop most of the tiniest dust particles and airborne allergens from re-entering the air you breathe. In fact it stops 99.97% of all particles as small as 0.3 microns - many times smaller than a human hair!!! Because of this incredible filtration performance, the HEPA Filter will quickly accumulate, inside the white filter folds, many fine dust particles that are difficult to see but which will eventually block or reduce your suction power - if not cleaned properly.

1.To remove the dust cup container, first press on the dust cup release button (1) that is located on the dust cup handle and at the same time press on the dust cup release button

(2) that is on the side of the upper housing (Fig. 8). Then pull the dust cup container out.

Dust

Cup

2. To empty the dust cup container, press on the trap door release button that is on the back side of the dust cup container. (Fig. 9)

3. The HEPA filter is

Fig. 9

located underneath the

 

dust cup container. (Fig.10)

 

Remove the Non-Woven Pre-Filter. (Fig. 11) Remove the HEPA filter, hold the edges and pull it out slowly.

Non-Woven

Pre-Filter

Fig. 11

HEPA

 

Filter

Fig. 10

4.Hold the HEPA filter

by the edges and vigorously “TapClean” the HEPA Filter dirty side down on a hard, flat surface until no more dust is observed falling out

from between the pleats of

 

Fig. 12

the filter. (Fig. 12) We

 

recommend washing the HEPA filter once a month or when suction appears to be reduced. Let the HEPA filter air dry completely for 24 hours.

5. Rinse the non-woven pre-filter and let

air dry completely for 24 hours.

6. Insert the non-woven pre-filter.

7. Reinstall the HEPA filter in the

vacuum.

8. To separate the debris screen from

the dust cup, hold the dust cup in one

Fig. 1

Fig. 3

26

Release

Button 1

Dust

Cup

Release

Button 2

Fig. 8

7

hand and turn the

dust cup cover counter

clockwise and pull apart.

To clean the

debris screen, we

recommend that

you rinse it under

lukewarm running

Fig. 13

water to remove the dirt that

 

accumulates on it, but always allow it to completely air dry before inserting back into the vacuum. (Fig. 13)

Page 8 Page 10
Page 9
Image 9
Shark EP602F, EP602RF owner manual Extension DU Tube Télescopique, Insérer LE Tube Télescopique Dans LE Boîtier Principal
Page 8 Page 10

EP602F, EP602, EP602RF specifications

The Shark EP602RF, EP602, and EP602F are innovative vacuum cleaners designed to elevate your cleaning routine. These models are particularly noted for their powerful suction capabilities and versatile features, making them suitable for a wide range of cleaning tasks.

One of the standout features of the Shark EP602 series is its advanced suction technology. Utilizing a high-performance motor, these vacuums provide strong suction power that effectively picks up dirt, debris, and pet hair from various surfaces, including carpets, hardwood floors, and upholstery. The powerful suction is complemented by a dual brush roll system that works in tandem to capture fine particles and larger debris efficiently.

The design of the Shark EP602 series prioritizes user convenience and ease of use. These models are equipped with a lightweight and ergonomic design, allowing for effortless maneuverability around furniture and tight spaces. The vacuums also feature a generous dust cup capacity, reducing the frequency of emptying and enabling extended cleaning sessions without interruption.

Another key characteristic of the Shark EP602 models is their advanced filtration system. The HEPA filtration traps allergens and dust, making these vacuums an excellent choice for households with allergy sufferers. This feature not only improves indoor air quality but also ensures that fine dust particles are contained.

The Shark EP602RF model brings an additional layer of convenience with its cordless design. Users can enjoy the freedom of movement without being tethered to a power outlet. This model also features rapid charging capabilities, ensuring that the vacuum is ready for use whenever you need it. Additionally, the runtime is optimized to allow for thorough cleaning on a single charge.

The EP602 and EP602F models are designed with smart technology, including intelligent sensors that recognize floor types and adjust suction power accordingly. This feature enhances cleaning efficiency while safeguarding sensitive surfaces. Furthermore, both models are equipped with specialized attachments, such as a crevice tool and upholstery nozzle, enhancing their versatility for detailed cleaning projects.

In summary, the Shark EP602RF, EP602, and EP602F vacuum cleaners stand out for their powerful suction, lightweight design, advanced filtration, and smart technology. With their range of features, these models cater to various cleaning needs, making them a reliable choice for any home.A comprehensive cleaning experience awaits with the convenience and efficiency these vacuums provide.
Top Page Image Contents