Shark HP-5030D manual Important Safety Information, Attended During Operation

Models: HP-5030D

1 22
Download 22 pages 18.48 Kb
Page 5
Image 5
Important Safety Information
WaRNiNg
protective
eyewear and cloth-
ing must be worn.
WaRNiNg
risk of
asphyxiation.
use only in a well ventilated area.
WaRNiNg
risk of fire.
do not add fuel when operating machine.

Important Safety Information

Use caution when operating. Do not point the spray gun from the attached pressure washer at anyone or at any part of the body. This machine is to be used only by qualified operators.

8.Never make adjustments on machine while it is in operation.

WARNING:High pressure spray from attached pressure washer can cause paint chips or other particles to become airborne and fly at high speeds.

9. Eye safety devices must be worn when using this equip- ment.

WARNING: Risk of asphyxiation

— Use this product only in a well ventilated area.

10.When the machine is operat- ing, do not cover or place in a closed space where ventila-

tion is insufficient.

WARNING: Risk of fire — Do not add fuel when the machine is operating or still hot.

11.Attached pressure washer with a spray gun should not be operated with the spray

gun in the off postion for extended periods of time as this may cause damage to the pump.

Check to make sure burner shuts off when spray gun trigger is closed.

12.Protect from freezing.

13.To prevent a serious injury, make certain quick coupler on discharge hose has locked before using pressure washer.

14.Do not allow acids, caustic or abrasive fluids to pass through the machine.

15.Inlet water must be from a cold water pressure washer (3,000 PSI maximum).

16.Do not allow CHILDREN to operate the pressure washer at any time. THIS MACHINE MUST BE

ATTENDED DURING OPERATION.

17.The best insurance against an accident is precau- tion and knowledge of the machine.

18.Do not operate this product when fatigued or under the influence of alcohol or drugs. Keep operating area clear of all persons.

19.We will not be liable for any changes made to our standard machines, or any components not purchased from us.

20.Do not overreach or stand on unstable support. Keep good footing and balance at all times.

21.Follow the maintenance instructions specified in the manual.

22.When making repairs disconnect from electrical source.

23.Turn burner off and open spray gun to allow water to flow and cool coil to 100°F before turning ma- chine off.

24.Before disconnecting high pressure hose from machine water outlet, open spray gun to relieve back pressure in hose.

Caution: This machine produces hot water and must have insulated components attached to pro- tect the operator.

PRESSURE WASHER OPERATOR’S MANUAL

97-6133 • Rev. 5/07

Page 5
Image 5
Shark HP-5030D manual Important Safety Information, Attended During Operation