MANUAL PRESSURE WASHER
Operating Instructions
OPERATOR’S
STEP 1: Check fuel tank and pump oil levels on both machines and connect garden hose to pressure washer. CAUTION: Only use fresh water to this machine.
Burner |
Switch |
STEP 2: Attach high pressure hose between pressure washer and ma- chine. Turn garden hose water on. Additional adapters and couplers may be needed to connect your brand of pressure washer to the machine.
STEP 4: Connect the power cord into the proper electrical outlet, then push in the GFCI reset button. Start up attached pressure washer according to the manufacturers in- structions.When a steady stream of water flows from the spray gun and wand the machine is ready for cold water cleaning.
STEP 4: For hot water washing, turn the machine burner switch to the ON position. Adjust thermostat to desired temperature setting. (The burner will light automatically.)