detergents and general operating techniques

WaRNiNg

WARNING: Some detergents may be harmful if inhaled or ingested, causing severe nau- sea, fainting or poisoning. The harmful elements may cause property damage or severe injury.

STEP 1: Use detergent designed specifically for pressure washers. Household detergents could dam- age the pump. Prepare detergent solution as required by the manu- facturer. Fill a container with pres- sure washer detergent. Place the filter end of detergent suction tube into the detergent container.

STEP 2: With the motor running, pull trigger to operate machine. Liquid detergent is drawn into the machine and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

cleaning tips

Pre-rinse cleaning surface with fresh water. Place de- tergent suction tube directly into cleaning solution and apply to surface at low pressure (for best results, limit your work area to sections approximately 6 feet square and always apply detergent from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If surface appears to be drying, simply wet down surface with fresh water. If needed, use brush to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 1 foot from cleaning surface. Use overlapping strokes as you clean and rinse any surface. For best surface cleaning action spray at a slight angle.

Recommendations:

• Before cleaning any surface, an inconspicuous

area should be cleaned to test spray pattern and

distance for maximum cleaning results.

• If painted surfaces are peeling or chipping,

use extreme caution as pressure washer may

remove the loose paint from the surface.

• Keep the spray nozzle a safe distance from the

surface you plan to clean. High pressure wash

a small area, then check the surface for dam-

PRESSURE WASHER OPERATOR’S MANUAL

IMPORTANT: You must flush the detergent injec- tion system after each use by placing the suction tube into a bucket of clean water, then run the pres- sure washer in low pressure for 1-2 minutes.

age. If no damage is found, continue to pressure

washing.

CAUTION - Never use:

•Bleach, chlorine and other corrosive chemi- cals

•Liquids containing solvents (i.e., paint thinner, gasoline, oils)

•Trisodium phosphate products

•Ammonia products

•Acid-based products

These chemicals will harm the machine and will dam- age the surface being cleaned.

rinsing

It will take a few seconds for the detergent to clear. Apply safety latch to spray gun. Remove black soap nozzle from the quick coupler. Select and install the desired high pressure nozzle. NOTE: You can also stop detergent from flowing by simply removing detergent siphon tube from bottle.

97-6133 • Rev. 5/07

Page 8 Page 10
Page 9
Image 9
Shark HP-5030D manual Detergents and general operating techniques, Cleaning tips, Rinsing, Recommendations
Page 8 Page 10

HP-5030D specifications

The Shark HP-5030D is a powerful and innovative home cleaning tool designed to simplify the process of cleaning while delivering impressive performance. This versatile vacuum is equipped with advanced technology and features that cater to a variety of cleaning needs, making it a favorite among homeowners.

One of the standout features of the Shark HP-5030D is its lightweight and compact design. Weighing in at just a few pounds, this vacuum is easy to maneuver and carry, allowing users to clean without the usual strain associated with heavier models. Its compact size makes it ideal for storage in small spaces, ensuring it can be easily tucked away when not in use.

The Shark HP-5030D is powered by a robust and efficient motor that provides strong suction power, making it effective for both carpet and hard flooring. This vacuum is equipped with a brush roll that is specifically designed to lift dirt and debris from various surfaces, offering a deep clean that is hard to match. The advanced motor technology also ensures quiet operation, allowing users to clean at any hour without disturbing others.

Notably, the Shark HP-5030D features a HEPA filtration system that captures 99.9% of dust and allergens, making it an excellent choice for households with allergies or respiratory concerns. This filtration system is complemented by a washable and reusable filter, reducing the cost of maintenance while promoting sustainability.

Another impressive characteristic is the vacuum’s versatility; it comes with several attachments that cater to different cleaning tasks. The included crevice tool is perfect for tight spaces, while the upholstery tool efficiently cleans furniture and drapes. The vacuum also features a dusting brush, making it capable of tackling delicate surfaces without causing damage.

Moreover, the Shark HP-5030D is designed for ease of use. It features a large capacity dust bin that can easily be emptied with the touch of a button, minimizing mess and making the disposal of dirt and debris simpler than ever. The vacuum also has a convenient one-click transformation into a handheld mode, making it straightforward to reach high or low areas.

In summary, the Shark HP-5030D stands out in the market for its lightweight design, powerful suction, HEPA filtration, and versatile attachments. It combines functionality with ease of use, making it a valuable addition to any cleaning arsenal. Whether it's for everyday cleaning or tackling specific messes, this vacuum is designed to meet the demands of modern households with efficiency and style.
Top Page Image Contents