Steam Mode
1
3
2
STEAM CLEANING
1Plug in the cleaning unit. Slide the toggle switch to expose the steam power button.
2Press the steam power button to the ON “I” position. The illuminated red light indicates that the “boiler” is on. Wait 30 seconds for the water to heat up and for steam to be ready.
3Place your foot lightly on the top of the base. TILT HANDLE BACK TO ACTIVATE STEAM PUMP.
4Push handle upright to stop steam.
NOTE: Check water level and fill anytime throughout the cleaning process to maintain optimal steam.
10
TOLL FREE:
MV2010_11_IB_ENG_110103.indd 10 |
