11
HELP LINE: 0844 873 0728
Above-Floor Cleaning
CLEAN THE FLOOR IN DE TACHABLE CANISTER
MODE
1 P ress the extension wand relea se button and pull
the extension wand up.
2 Attac h the floor nozzle onto the end of the
extension wand. (Fig. 16)
3 Press the On/Off switch to the “I” position to t urn
the suction motor on.
NOTE: The rota ting brush will not rotate in
Detachable Canister mode.
With Floor Nozzles
CLEAN ABOVE THE FLOO R IN UPRIGHT VAC OR
DETACHABLE CANISTER MODE
1 Press the handle release button and pull the
handle up or press the extension w and release
button and pull the extensio n wand up.
2 Attach desired accessory onto th e end of either
the extension wand or the handle. (Fig. 15)
3 Your vacuum has tremendous su ction
power. Adjust the amount o f suction with
the suction release o n the handle. Open
the valve (a) by rotating the c ollar 90˚
counterclockwise for low suction when
doing light jobs such as d rapes or fine
surfaces. Close the va lve (a) by rotating
the collar clockwi se 90˚ for high suctio n
and when using the ha nd held turbo brush.
(Fig. 15)
4 Press the On/Off switch to the “I” position to turn
the vacuum on for above-floor cleaning.
IMP ORTANT: Ensure vacuum is in upright
position. Do not use position “II” wh en cleaning
above the floor in the upright vac mo de as this
will engage the motorized floor br ush. The
rotating brush may damage your floo r if run for a
prolonged period of time in one are a.
Fig. 16
English
Fig. 15 Suction
Release Collar
a
Release suction
for easier push &
pull on high pile
carpets and area
rugs.
NV350UKMS_26_IM_ENG_120906_1.indd 11 12-09-06 2:59 PM