REPLACING THE HEADLIGHT LAMP
REPLACEMENT INSTRUCTIONSCaution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the
power cord from the wall outlet before replacing any of the parts below.
1Set the vacuum cleaner to the parallel position.
2
Loosen the screws to remove the lens.
3When removingthe headlight lamp, becareful
not to pull on the headlight lampwiring.
4Remove the lamp by pushing itgently in
the direction of the arrow and then turning
it counterclockwise.
5Push a new lamp gently into the socketand
turn it clockwise to tighten it .
Use a standard bayonet base appliance lamp
rated at 120V and 15W (LAMP MAX.15W).
Caution: Be careful not to clamp the
headlight lamp wiring.
6Reattach the lensand fasten thescrews.
12
Socket
Screw
Lens
Headlight Lamp
2
1
Socket
2
1