Shark S3901D Using Your Removable Handheld Steamer with Direct Steam Nozzle

10 TOLL FREE: 1- 800-7 98-739 8
Cleaning Tip: The Di rect Steam Nozzle creates direct ste am spray to clean
and sanitize hard to reach nooks & cra nnies and other places where ger ms
may build up. Use the Direct Ste am Nozzle to loosen and dislodge comp act
dirt often found in corn er and tight places where traditional m ethods and
cleaning tools tend to push dir t into, making it tough to reach and clean .
Spray direct steam and wipe cle an with a wet cloth or paper towel.
Using Your Removable Handheld Steamer
with Direct Steam Nozzle
CAUTION: Do not press the steam
trigger until the Direct Stea m Nozzle
is snapped into the main nozzle of
your Handheld Steamer.
4 To remove the Direct Steam Nozzle,
press and hold down the Han dheld
Release Buttons. The n slide out the
Direct Steam Nozzle using the g rip.
CAUTION: Do not press the steam
trigger while removing the Di rect
Steam Nozzle. Avoid touching the tip
of the Direct Steam Nozzle, as thi s
will be very hot after steami ng.
NOTE: The Handheld Steamer may
continue to emit steam for a few
seconds after the trigge r is released
This is normal, and the ste aming will
eventually come to a stop.
FOR SPOT CLEANING AND
STEAMING
2 First attach the Direct Steam Nozzle
by pressing the nozzle onto the
Handheld Steamer until i t clicks into
place. (fig. 16)
3 Then press and hold the steam
trigger button to start ste aming.
While the steam trigger but ton is
pressed and held down, th e ON/
STANDBY button will be solid blue .
When released, the ON /STANDBY
button will return to flashing bl ue.
(fig. 17).
For effective cleaning, hold the
steam output nozzle 1-2 inches away
from the surface you’re clea ning.
fig. 16
fig. 17
S3901D_11_IB_E_110704_2.indd 10 11-07-04 11:07 AM